U0214

Lost Communication With Remote Function Actuation

Car Fault Codes Network

Severity Medium Do not ignore it; it may get worse and cost more.
Can you still drive? With care, short trips only
Who can fix it? Needs a workshop
Typical repair time 30 minutes – 4 hours
Typical cost SAR 100 to 3,000

What it means

Vehicle modules share data over a network such as the CAN bus. This code is set when messages from the module that handles remote key functions stop reaching other modules. These functions include remote locking and unlocking and, on some vehicles, keyless start or remote start. The role and name of this module vary by manufacturer, and the cause is usually its power, ground or network wiring.

Symptoms4

  • Remote key fob does not lock or unlock the doors.
  • Key not detected message on vehicles with keyless start.
  • Remote start or other key-related convenience features not working.
  • On some vehicles, hard starting or a no-start.

Possible causes6

  • Weak battery or loose battery terminals.
  • Blown power fuse for the module.
  • Poor module ground or a corroded connector.
  • Open or shorted network wiring to the module.
  • Water in the module or its connector.
  • Internal failure of the module itself.

How to diagnose5

  1. Check the battery and measure its voltage, since low voltage causes multiple communication codes.
  2. Read codes from all modules to see whether the lost communication is limited to this module or affects others.
  3. Try to connect directly to the module with a scan tool; if it does not respond, check its fuse, power and ground at the connector.
  4. Locate the module using the manufacturer information and inspect its connector and network wiring for water, corrosion or damage.
  5. Measure the network line resistance and compare it with the manufacturer specification.

How to fix5

  1. Charge or replace the battery and clean its terminals.
  2. Replace the blown fuse after confirming there is no short in the circuit.
  3. Repair the ground, connector or network wiring, dry out any water and fix the leak.
  4. Replace the module if proven faulty, programming it and the keys if the manufacturer requires it.
  5. Clear the codes, test locking, unlocking and starting, and confirm the code does not return.

Repair cost

In Saudi riyals; the highlighted part is the expected range for this fault.

The cost is low for a battery, fuse or connector fix, and rises if the module must be replaced and programmed along with the keys.

Prices are rough estimates for common cars at independent workshops and vary with the car and the source of the part.
Prices last updated: September 2026

Frequently asked questions

Why does this code affect different cars in different ways?

The module's functions vary by manufacturer. On some vehicles it only handles remote locking, while on others it is part of keyless start, so starting can be affected too.

Could the key fob battery be the cause?

A weak fob battery reduces range, but it does not make the module drop off the network. This code points to the module's power, wiring or the module itself.

This guide is for information only and does not replace an inspection by a qualified technician. If the fault involves brakes, steering, engine temperature, electrics or refrigerant, do not attempt the repair yourself.

Report a mistake

Spotted something inaccurate? Tell us and we will review and correct it.

Only if you want an email when we reply.

9 + 9 = ?

Related codes